TDM-1 - Specifications

TDM-1 TEMPERATURE TRANSMITTER SPECIFICATIONS

HOME > PRODUCTS > TDM-1 >TDM-1 SPECIFICATIONS

Specifications


Measuring range

-50 to +150 °C (-58 to +302 °F)

Accuracy

+/- 0.1 °C (Class AA, DIN 60751)

Measuring principle

Dual semiconductor diode junction

Sensor probe diameter

Ø3.0 mm (0.12 inch)

Sensor probe length

15-140 mm (0.59 to 5.51 inch)

Output signal (Voltage version)

0-10 VDC (Programmable scaling with S4-Connect™)

Output resolution (Voltage version)

16 bit / 150 uV

Output signal (Current version)

4-20 mA(1) (Programmable scaling with S4-Connect™)

Output resolution (Current version)

16 bit / 244 nA

Solid state relay contact rating (optional)

250 mA, 50 VDC / VAC peak

Environment conditions


Operating ambient temperature

-40 to +100 °C

Media temperature

-50 to +150 °C

Storage ambient temperature

-40 to +125 °C

Maximum media pressure (2)

200 bar / 2,900 PSI / 20 MPa

Mounting position

Any

Protection rating, EN 60529/A2:2013

IP67 (3), IP65 (4)

Humidity, IEC 68-2-38

98%, non-condensing

Power supply


Supply voltage 

12-30 VDC

Power consumption (Voltage version)

240 mW (Max)

Power consumption (Current version)

600 mW (Max)

Reverse polarity protection

Yes

Overvoltage protection

Yes

Internal fuse

100 mA (Thermal recoverable)

Materials


Enclosure

SS 1.4404 / AISI 316

Electrical connector DIN 175301-803A

PA Nylon

Electrical connector M12 IEC 61076-2-101

PA Nylon, Nickel plated Zinc alloy

Process connection

SS 1.4404 / AISI 316L

Process leak tightness (ISO 27895:2009)

<1·10-9 mbar·l/sec.

Approvals


CE

EMC directive 2014/30/EU

RoHS compliance

Directive EU 2015/863

  1. 4-20 mA NAMUR NE43 compliant signal.
  2. Please consult with Sens4 application support (email: support@sens4.com) to select the best option for the application. An assessment of stresses induced by fluid flow might be needed (following the guidelines of ASME PTC 19.3 TW – 2016).
  3. IP67 for product versions with IEC 61076-2-101 M12 connector.
  4. IP65 for product versions with DIN EN 175301-803 A connector.


Specifications are subject to change without further notice.